Flex P-trap is easy to install and adjustable to fit with all plumbing fixtures. Flex P-trap can be installed on kitchen sinks, bath sinks, and laundry sinks. The Universal Flex P- trap/24 has 24 inches length, so it can replace a regular p-trap (18 inches length), and 6 inches extension tube. Minimum water seal for Universal Flex P-trap/24 is 2 inches. If you have a special situation, (short P-trap) you need to cut the flexible tube to a specific length. The Flex P-trap/24 can also work like an extension tube for a regular p-trap, draining tube for shampoo bowl (if sink have tailpiece) and draining tube for garbage disposal. If you eliminate the coupling the Flex p-trap works like a connector tube. When using the Flex P-trap, the tensions (forces) from the plumbing line can be eliminated by pouring boiling water (hot water) and cold water down the Flex P-trap, once it is installed. By doing this, the cold water will stabilize the shape of the Flex P-trap and will align the plumbing line. The Flex P-trap is self-cleaning of hair.

To replace an old p-trap you can measure the length of the existing p-trap on the outside of the U shape with a string, and cut the tube to the length you need. If you don’t have an old p-trap, measure the distance from the end of the tailpiece to the draining and add 10 inches (add one inch for safety) and cut the tube to the length you need.

Universal Flex P-trap/22 (white) is easy to install and adjustable to fit with all plumbing fixtures. Flex P-trap can be installed on kitchen sinks, bath sinks, and laundry sinks. The Universal Flex P-trap has 22 inches so it can replace a regular p-trap (18 inches length) and has a 4 inches extension. Minimum water seal for Universal Flex P-trap/22 is 2 inches and maximum 4 inches. If you have a special situation, (short P-trap) you need to cut the flexible tube to a specific length. The Flex P-trap/22 can also work like an extension tube for a regular p-trap, draining tube for shampoo bowl (if the sink has a tailpiece) and draining tube for garbage disposal. If you eliminate the coupling, the Flex p-trap works like a connector tube. When using the Flex P-trap, the tensions (forces) from the plumbing line can be eliminated by pouring boiling water (hot water) and cold water down the Flex P-trap, once it is installed. By doing this, the cold water will stabilize the shape of the Flex P-trap and will align the plumbing line. Flex P-trap is self-cleaning of hair.

To replace the p-trap you can measure the length of the existing p-trap on the outside of U shape with a string, and cut the tube to the length you need. If you don’t have the old p-trap, measure the distance from the end of tailpiece to the draining and add 10 inches; then cut the tube to the length you need.

Universal Flex PS-trap has 20 inches length, to replace rigid p-trap. Minimum water seal for Universal Flex PS-trap is 2 inches and maximum water seal 4 inches. The Universal Flex PS-trap has 1.25 inches on sink and 1.50/1.25 inches on the wall’s draining. When you replace the regular p-trap on the plumbing line you don’t need to remove the pedestal sink, but you adjust the Flex P-trap by increasing or decreasing the water seal. If you want to keep the water seal to be two inches (short p-trap), you need to cut the flexible tube to a specific length.

If your draining is in the floor and you have an S-trap, you can eliminate the coupling and the flexible tubing will work the same as a tube connector.

Universal Flex CP-trap has all rubber washers and can’t be installed on a bathtub or a freestanding tub. The Flex CP-trap is the first universal p-trap on the market which fits with all the plumbing fixtures under the sink. The Flex P-trap has 22 inches length to replace rigid 1-1/2 and 1-1/4 p-trap. When you rotate the p-trap around the tailpiece of the sink, you can adjust the length of the horizontal arm and you can keep a constant water seal of minimum 2.5 inches. If you have a special situation, you can cut the flexible tube to a specific length (Flex CP-trap/18). To install the Flex P-trap you don’t need any tools and it can easily be removed to clean up the line. When using the Flex P-trap, the tensions (forces) from the plumbing line can be eliminated by pouring hot water and cold water down the Flex P-trap, once it's installed. By doing this, the cold water will stabilize the alignment of the Flex P-trap. It is resistant at high temperatures and it is self-cleaning of hair.

The Universal Flex P-trap has two plastic washer and one special rubber washer to fit with all drainers and can be installed on a bathtub or a freestanding tub. The Flex P-trap is the first universal p-trap on the market which will fit with all plumbing fixtures under the sink. The Flex P-trap has 18 inches length to replace rigid 1-1/2 or rigid 1-1/4 p-trap and doesn't need to be cut. If you rotate the p-trap around the tailpiece of the sink, you can adjust the length of the horizontal arm and keep a constant water seal at minimum 2.5 inches. The p-trap can be installed on kitchen sinks, bath sink, pedestal vanity, laundry sinks, bathtub and freestanding bathtub. The Freestanding Bathtub can be lifted on two 4 x 4 wood block, then fill up 1/4 tub with water and check if it's leaking with your hand. When you install the p-trap for a freestanding bathtub, you need to cut the floor 12x4 inches. The tensions (forces) from the plumbing line can be eliminated by pouring hot water and cold water down the Flex P-trap, once it is installed. By doing this, the cold water will stabilize the alignment of the Flex P-trap. It is resistant at high temperatures and it is self-cleaning by hair. Flex CP-trap/18 replaces the Shallow P-trap.

Universal Flex BP-trap/14 can be used for Bathtubs and for Freestanding Bathtubs with overflow with nuts or with overflow glued. The Flex P-trap has 2.0-2.5 inches water seal, and it can easily be moved right or left when you adjust the bathtub. For a Bathtub with overflow with nuts we have Flex P-trap/14 inches length and one Female adapter. For a Bathtub with overflow glued we have Flex P-trap/12 inches length, and the coupling is replaced with a Male adapter. The Flex BP-trap/14 can replace rigid overflow because it does have extra length. The Freestanding Bathtub can be lifted on two 4 x 4 wood block, you can fill up 1/4 tub with water and check if it's leaking with your hand. When you install the p-trap for freestanding bathtub you need to cut the floor 9x4 inches. The tensions (forces) from the plumbing line can be eliminated by pouring hot water and cold water down the Flex P-trap, once it is installed. By doing this, the cold water will stabilize the shape of the Flex P-trap and will align the plumbing line. It is resistant at high temperatures and it is self-cleaning of hair. The Flex BP-trap/14 has only plastic washers for a longer life. Flex BP-trap/14 replaces the Shallow P-trap.

Universal Flex FB-trap/18 has 18 inches length to replace a Shallow P-trap and can be installed only under the floor of the bathroom. The Flex FB-trap can be installed on a bathtub or a freestanding tub and the floor of bathroom must be cut. The Flex FB-trap/18 has plastic washers and one Female adaptor. The Freestanding Bathtub can be lifted on two 4 x 4 wood block, you can fill up 1/4 tub with water and check the Flex P-trap for any leaks with your hand. When using the Flex FB-trap, the tensions (forces) from the plumbing line can be eliminated by pouring hot water and cold water down the Flex P-trap, once it is installed. By doing this, the cold water will stabilize the alignment of the Flex P-trap. It is resistant at high temperatures and it is self-cleaning of hair.

Universal Flex FB-trap/24 has 24 inches length to replace Shallow P-trap and can be installed either above the floor of the bathroom or under it. The Flex FB-trap has plastic washers and one Female adaptor. The Flex FB-trap can be installed on a bathtub or freestanding tub and the floor of bathroom must to be cut. The Flex FB-trap/24 can be cut to 18 inches length and installed under the floor of bathroom. The Freestanding Bathtub can be lifted on two 4 x 4 wood block, you cna fill up 1/4 tub with water and check if the Flex P-trap is leaking with your hand. The tensions (forces) from the plumbing line can be eliminated by pouring hot water and cold water down the Flex P-trap, once it is installed. By doing this, the cold water will stabilize the alignment of the Flex P-trap. It is resistant at high temperatures and it is self-cleaning of hair.

Universal Flex SB-trap has 30 inches length with 4 inches maximum water seal, and the shampoo bowl can be tilted 20 degrees. The Flex SB-trap can be installed on a sink with coupling or direct to strainer with a plastic nut (if you eliminate the coupling). If you eliminate the horizontal arm, the Flex p-trap can work similar to an extension p-trap 26 inches long and the shampoo bowl can be tilted 20 degrees. If you eliminate the coupling, the flex p-trap will work like a Flex connector strainer 24 inch long. If you cut the tubing to 20 inches length the flex p-trap works like a Shampoo Bowl-drain hose. The length of drain hose can be cut to any length needed.

Universal Flex BP-overflow/extension is 32 inches in length and can be used like an extension or an overflow for a bathtub or a freestanding bathtub. The Flex BP-extension/overflow has plastic washers and the length of the drain hose can be cut to any length needed.

If there is not enough space under the tub, you can eliminate the coupling and connect the tubing directly with the strainer. See the connection of Flex BP-extension with the freestanding tub strainer.

Universal Flex SB-drain hose is 30 inches in length and has one rubber reduction washer. Shampoo Bowl-drain hoses currently on the market have lengths of 14, 18 and 28 inches. The length of drain hose can be cut to any length needed. If you eliminate the coupling, the drain hose is 28 inches and can be connected directly to the strainer; if you cut 10 inches, it will be 18 inches long. To connect the tubing with the strainer, you can use the original slip joint nut from the strainer. The Flex SB-drain hose can replace the shampoo bowl tube with lengths of 14, 18 and 28 inches. If you eliminate the coupling, the Universal Flex SB-drain hose can be used as a strainer drain hose.

Universal Flex Connector Strainer-drain hose is 24 inches long and has one rubber reduction washer.

The drain hose can be cut to any length you need. The Universal Flex-drain hose can be used as a Strainer-drain hose and a Shampoo Bowl-strainer drain hose.

To connect the tubing with the strainer you can also use original slip joint nut from your strainer.

Universal Flex EP-tube is 12 inches long and has two rubber washers and it can be used with 1-1/2 p-trap or 1-1/4 p-trap; it can also be used like a short p-trap and a draining tube for garbage disposal. The length of extension tube can be cut to any length you need and have flexibility on full length.

Universal Flex GD-drain tube can be installed with: Insinkerator 333, Sinkmaster 750, Badger 5 etc. and will completely eliminate the vibrations from the plumbing line. Universal Flex GD-drain tube will fit with all plumbing fixtures and it is self-aligning. The length of tubing can be cut or adapted for the existing draining line. Please see the Product info page from the website.

Universal Flex SP-trap is 30 inches long and has two adapters. It can be used with 1.50/ 1,25 sink drains or 1.25/1.50 floor drains. The length of flexible tube can be cut to any length you need and is self-cleaning and self-aligning. Minimum water seal is 2.5 inches and maximum is 4.0 inches.

Universal Flex S-trap is 30 inches long and has two adapters; it can be used with 1.50/1.25 sink drains or 1.25/1.50 floor drains. The length of flexible tube can be cut to any length you need and is self-cleaning and self-aligning. Minimum water seal is 2.5 inches and maximum 4.0 inches.